Are you facing the same issue as I faced last year about how to measure recliner springs? If you are facing the same problem, you are at the right spot where I will share my personal experience. In the second last year, I bought a recliner for my home comfort and relaxation.
However, over time, the springs in a recliner wear out or lose their tension, leading to a less comfortable sitting experience. To replace or repair these springs, accurate measurements are crucial. In this guide, we will direct you through measuring recliner springs step by step.
Tools and Materials You’ll Need:
● Measuring tape
● Pen and paper
● Screwdriver (if needed for disassembly)
● Camera or smartphone (optional, for reference)
Contents
- 1 How to Measure Recliner Springs? 8 Steps Guide
- 1.1 Step 1: Safety First:
- 1.2 Step 2: Locate the Springs:
- 1.3 Step 3: Measure Spring Diameter:
- 1.4 Step 4: Measure Spring Length:
- 1.5 Step 5: Count the Coils:
- 1.6 Step 6: Determine the Wire Gauge:
- 1.7 Step 7: Take Pictures (Optional):
- 1.8 Step 8: Document Your Measurements:
- 1.9 Common Mistakes to Avoid When Measuring Recliner Springs
- 1.10 Benefits of Measuring Recliner Springs: The Hidden Rewards
- 2 Frequently Asked Questions:
- 3 Final Thoughts:
- 4 Author
How to Measure Recliner Springs? 8 Steps Guide
Step 1: Safety First:
Before measuring, ensure your safety by disconnecting any electrical components and removing cushions or covers from the recliner. If needed, consult your recliner’s manual for proper disassembly instructions.
Step 2: Locate the Springs:
Check the springs you need to measure. You can find springs under the seat, between the seat and backrest, or along the sides. You might have one or multiple springs depending on the design of your recliner.
Step 3: Measure Spring Diameter:
Now measure the diameter of the spring with measuring tape. Place the measuring tape at one end of the spring’s coil and measure across the widest part. Note this measurement is in inches or millimeters.
Step 4: Measure Spring Length:
Follow the coil’s curvature and measure the spring’s length from one end to the other. Be sure to measure only the size of the spring, excluding any hooks or attachments on the ends.
Step 5: Count the Coils:
Count the number of coils in the spring. Begin counting from one end of the coil and continue until you reach the other end. Count the loops accurately; this information is essential for purchasing replacement springs.
Step 6: Determine the Wire Gauge:
The wire gauge refers to the thickness of the spring wire. You can determine the wire gauge by using a wire gauge measuring tool. If you don’t have a wire gauge tool, you can use a penny to estimate the wire gauge.
Compare the spring’s wire thickness to the edge of the coin. Different coins can be used as a reference for various wire gauges (e.g., a dime for smaller gauge, a nickel for medium gauge, and a penny for thicker gauge).
Step 7: Take Pictures (Optional):
Taking pictures of the springs and their measurements can be helpful, especially if you’re ordering replacement springs online or seeking advice from professionals.
Step 8: Document Your Measurements:
Record all the measurements and information you’ve collected in a neat and organized manner. This will be invaluable when searching for replacement springs or consulting with experts.
Also, check a proper guide to move your recliner by yourself.
Common Mistakes to Avoid When Measuring Recliner Springs
Mistake 1: Ignoring the Role of Measuring Tape
One of the primary risks is disregarding the importance of a measuring tape. To truly understand your recliner’s springs, rely on a measuring tape’s precision.
Mistake 2: Ignoring the Length of the Spring
If you ignore the length of the spring, it can lead to discomfort. The length directly influences tension, and an improperly measured spring can lead to an imbalance. To avoid this, ensure that you measure from end to end.
Mistake 3: Overlooking the Coil Count
Counting the coils might seem dull, but it’s a critical step in measuring recliner springs. Missing a single count can lack the required tension and support. Don’t rush this step—carefully count each coil from top to bottom.
Mistake 4: Neglecting Wire Gauge Measurement
The wire gauge, or thickness of the spring wire, is often disregarded in measurements. However, this measurement determines the spring’s strength and ability to provide support.
Mistake 5: Not Seeking Professional Advice:
Avoiding professional guidance can lead to risk. Expert opinions can shed light on different variations in recliner springs. Consulting a professional or researching reputable sources can save you from ordering incorrect replacement springs.
Also read a proper guide to keep your Recliner from Sliding on Wood Floor.
Benefits of Measuring Recliner Springs: The Hidden Rewards
1. Unveiling Optimal Comfort:
Comfort is the key point of every recliner. Accurate measurements ensure your selected replacement springs align perfectly with the original ones. This will lead your recliner to excellent comfort and relaxation.
2. Shielding Against Sagging:
One of the most common issues with recliners is sagging, which is the gradual sinking of cushions. Measuring your recliner springs helps you avoid this problem. Precise measurements lead to springs that maintain their original tension.
3. Enabling Smooth Replacements:
When the time comes to replace worn-out springs, accurate measurements seed up the process, and you can confidently source replacement springs that are an exact match. This seamless transition minimizes downtime, allowing you to enjoy your renewed recliner on time.
4. Avoiding Discomfort and Misalignment:
Misaligned or improperly sized springs can lead to discomfort, affecting your posture and overall well-being. Accurate measurements prevent such issues and enhance the springs to align your recliner’s structure.
5. Enhancing Visual Appeal:
Measuring recliner springs isn’t just about functionality, but it’s also about aesthetics. Accurate replacements maintain the recliner’s original appearance and prevent sagging or uneven cushions. Your recliner will not only feel great but look great as well.
6. Saving Time and Resources:
Precise measurements save you valuable time and resources. Instead of trial and error with wrong-fitting springs, you’ll have replacements that fit perfectly on the first try. This efficiency is not only convenient but also cost-effective in the long run.
Frequently Asked Questions:
What is the overall Length of a Spring in a Recliner?
There is a simple formula for measuring the overall length of the spring of the recliner, which is equal to Pickup length + Preload length + Working extension + (Inside diameter x 3.14 x 1.5). This formula will help you to measure any spring.
Why Should I Measure a Recliner’s Spring?
Measuring the recliner spring is essential for seat comfort and reliability. When you buy a recliner, it is the only way to know the complete tension level of a recliner. Your comfort is your life, so measure your recliner springs correctly.
Final Thoughts:
Now you are entirely aware of how to measure the recliner springs. This is important to measure recliner springs accurately, and replacing worn-out springs enhances the comfort and functionality of your recliner. Following this guide’s steps, you can confidently measure your recliner springs’ diameter, length, coil count, and wire gauge.
Remember that safety and precision are most important to ensure a successful outcome throughout the measurement process. If you still need help, you can contact us on this website. Please leave a message to our team–we will contact you as soon as possible. Take care of yourself and your family.
